Found a seal leak in my 75 gallon last night and am in the process of setting up my new 75 gallon tank(luckily i just got it, Everything must happen for a reason)
Tools/Supplies
Caulking gun
Silicone 1 GE Door and window
Razorblade
glove for smoothing
Painter's tape
Leaky tank in my case 75 gallon tank.
1. Make sure you have all the supplies.
2. Put fish in other tank clean tank out and dry.
3. Remove top frame from tank.(
What about the bottom frame?)
4. Use a razorblade to remove old silicone, on the inside only i believe. (
this is where im confused do i remove the silcone between the glass? I read no but they how to you reseal it if there is still old silicone in it? Also i should not seal under the tank at all?)
5. Tape the glass of the tank near the intersecting points of the glass as to make a frame on the inside of the tank. this is for when siliconing so it is nice and clean. (
also dont know how large the bead should be)
6. Silicone the tank from bottom up on the sides and from side to side on the bottom pane.
7. smooth with finger
8. Let sit for a minimum of 48 hours.
9. Refill tank let sit for atleast another 48 hours to make sure there is no leak anymore. If there is still a leak repeat steps 1-8 or contact professional if there is such a thing.

10.Restart tank from scratch
Now this is my other question:
If i was to take everything the filters the water the gravel the plants and all of that how long would it take for my 75 gallon to cycle? would it still be 6 to 8 weeks? or would it take no time at all because i need to get the current tank down asap and i have no where to put the fish if it is going to take 6 to 8 weeks. now if it is going to take a week or 2 then I can try to wait it out it just seems scary. i dont want the tank to explode on me or crack from this seal leak if that even happens?
I realize there is alot of questions So if anyone is willing to help out and answer any of the questions or just say something i am about to do wrong I would greatly appreciate it. Thank you
Cole