"AIR Distributor HELP"

[OTISJOEPRETTY]

Can anyone tell me were to get or order plugs for this air Distributor to close off outlets that I am not using right now until I can get my pvc up ?

[OTISJOEPRETTY]

I'ts plastic !!!

[danielratti]

you could always just do it yourself and take a short section of airline and loop it to block off unused sections.

[Ron]

you could always just do it yourself and take a short section of airline and loop it to block off unused sections.

x2.

If you have an odd number of unused ports, for the final one you could knot a piece of airline to plug it.

[Marty]

If you have an odd number of unused ports, for the final one you could knot a piece of airline to plug it.

Either that, or use one of those in line valves attached to the end of a small piece of air line.

[four_by_ken]

The loops made out of air lines is the best idea... but if you really want plugs, go to an auto parts store and look for vacuum line plugs.

[Maize-N-Blue-D]

It won't look "pretty" but the best and cheapest "sugessestion" would be the use of air lines.

[Jaws22]

Or you could use a piece of tubing and put a check valve on backwards.

[RichE]

gorilla glue a piece of airline tubing, make sure you put a little on the open end of the air line, basically you are making a cap? Thats what i did before i went closed loop and it worked perfect