Author Topic: Tank resealing  (Read 2765 times)

Offline Gooftroop69

  • Newbie
  • *
  • Posts: 2
    • Hartland
Tank resealing
« on: February 26, 2014, 09:13:54 PM »
Hey guys,  my 72 gal.  Bowfront blew a seal last week and was wondering if anyone knew of somebody who does repairs,  and possibly warranties or guarantees their work.  Thanks for the info

Offline Sean

  • Hero Member
  • *****
  • Posts: 575
    • Lathrup Village
Re: Tank resealing
« Reply #1 on: February 26, 2014, 09:25:19 PM »
it doesn't seem to be too difficult to do on your own. Check out Steve's recent thread on him resealing his 265 it seemed to have some good info
55 gallon African cichlid show tank
29 gallon BioCube reef tank

Offline Regalblue

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 5971
    • Livonia
    • MCA
Re: Tank resealing
« Reply #2 on: February 26, 2014, 11:36:27 PM »
Shoot me a private msg if you'd be willing to bring the tank to the Taylor area &  I'll give you my guys number. (Yes,  he guarantees his work)

Offline olliesshop

  • Full Member
  • ***
  • Posts: 103
    • 48236
Re: Tank resealing
« Reply #3 on: April 18, 2014, 04:10:16 AM »
It looks like my 125 now has a leak of a drop every 20 minutes or so.  The leak is showing up beneath the front of the tank, and I currently don't know the source.

Could this type of leak possibly be repaired without emptying the tank?  I assume no, but wanted to double-check to see if it's worth a try.

If not, then it looks like I'll link up with Blair to get the repair guys contact info.

Thanks again all for all the help!
Tim

YouTube Channel - http://www.youtube.com/user/olliesshop/videos
Aquarium Pictures - http://olliesshop.smugmug.com/Aquariums
My Church I'm webmaster of - www.feelc.org

Offline lohachata

  • Full Member
  • ***
  • Posts: 104
    • Cleveland
Re: Tank resealing
« Reply #4 on: April 18, 2014, 05:21:16 AM »
i have made a number of underwater repairs...a little tricky to do but not too hard...
clear the front seam well..make sure there is no sand around it..cut a strip of visqueen the length of the tank and 2" wide.
run a heavy bead of silicone the length of the strip..you will need help to lay the strip in place...then run your finger to spread and smooth the silicone...make sure it completely covers the old silicone.....leave the visqueen on and let it set for a couple of days.....then peel it a little..if the silicone is still uncured leave it for a few more days until you can peel it away cleanly..

Offline olliesshop

  • Full Member
  • ***
  • Posts: 103
    • 48236
Re: Tank resealing
« Reply #5 on: April 18, 2014, 07:23:02 AM »
Thanks ... that sounds promising!

Now I have to find out where the leak is coming from.  I noticed when I was changing the water this morning the leak stopped.  But when the water level went back to the top it started again.  So I assume it's somewhere in the top half of the tank.  I was hoping I just had the water too high (as in above the glass a little, but below the top of the plastic frame), but the water is about 3/4" below the glass.

It sounds like this will be a long-term adventure.
Tim

YouTube Channel - http://www.youtube.com/user/olliesshop/videos
Aquarium Pictures - http://olliesshop.smugmug.com/Aquariums
My Church I'm webmaster of - www.feelc.org

Offline danielratti

  • Hero Member
  • *****
  • Posts: 1772
    • Midland
Re: Tank resealing
« Reply #6 on: April 18, 2014, 07:40:32 AM »
Is the center braces intact on your tank

Offline olliesshop

  • Full Member
  • ***
  • Posts: 103
    • 48236
Re: Tank resealing
« Reply #7 on: April 18, 2014, 09:41:35 AM »
Yes it currently is.  It was broken at one time, though, and I fixed it a year ago.  So maybe the stress from having it broken for a while could have caused a leak?
Tim

YouTube Channel - http://www.youtube.com/user/olliesshop/videos
Aquarium Pictures - http://olliesshop.smugmug.com/Aquariums
My Church I'm webmaster of - www.feelc.org

Offline danielratti

  • Hero Member
  • *****
  • Posts: 1772
    • Midland
Re: Tank resealing
« Reply #8 on: April 18, 2014, 10:04:50 AM »
Yup. Plus his quick fix he posted is just a bandaid to a problem.