Michigan Cichlid Association
General Category => DIY => Topic started by: Steve on December 07, 2019, 01:23:46 AM
-
Been a while since I started a new project. Decided to get working on something new now. Going to try my hand at building a paludarium out of a 75g drilled tank I picked up last week. Decided to take out the 3d foam rock wall I built about 3 yrs ago where I use to have an in wall 75g tank. I'm removing that wall and then framing in a new area that will recess back and create a new area of space that will be around 25-30sqft.
Planning on doing a very tropical style paludarium with at least one/two waterfalls, about 6" of water, ultrasonic fogger, lots of plants and also plan to use a couple of my tropical bonsai trees in the build and have them stick up over the rim of the tank. The tank I got is a drilled 75g that is in "ok" shape so I plan to reseal that so it looks better as well as remove the upper and lower trim so it will be trim-less.
Got a little done today. Thank God for the new hammer drill, that thing is a life saver for drilling into concrete.
(https://imagizer.imageshack.com/img921/5463/Bj3XQx.jpg)
(https://imagizer.imageshack.com/img923/2023/B3xmI9.jpg)
(https://imagizer.imageshack.com/img922/2120/EccaAN.jpg)
-
Always awesome to see you doing a project
-
(https://imagizer.imageshack.com/img921/7154/d0Ghvl.jpg)
(https://imagizer.imageshack.com/img924/8291/jwWiHX.jpg)
Got a little more time to work on this project today. Got all the framing in done, so picked up some drywall and got that all roughed in. Still have to do the ceiling, tape&mud then sand and paint then I can do the floor and the new area will be done so then I can start working on the actual paludarium tank itself then.
-
Looks to be coming along nicely
-
Just got done scraping up the floor tile. Want me to mail ya some Asbestos tiles for Christmas Blair? ;D
-
New area for the Paludarium project is done now. Finished up the framing & drywall a couple weeks ago, so spent the past few days doing the sanding, painting, flooring and lighting. Went with a color called Sandy Sage which I thought would have a real natural / earthy look to it which should go well with the heavily planted tank. Wanted a contrast for the floor so went with a white/cream pattern to help designate the area better so it didn't just run all together with the rest of the shop/office. Now I can start working on the tank itself soon.
(https://imagizer.imageshack.com/img923/203/BW7FAl.jpg)
(https://imagizer.imageshack.com/img923/7536/T2cOyy.jpg)
-
(http://imageshack.com/a/img923/4226/ZyZsV4.jpg)
(http://imageshack.com/a/img924/35/TPlN1h.jpg)
Paludariums always look much nicer rimless so just got done removing the tip trim. Next will be cleaning it up and resealing.
-
(https://imagizer.imageshack.com/img924/5531/OWXRr4.jpg)
(https://imagizer.imageshack.com/img921/249/706d2h.jpg)
A lot of the nicer looking paludariums usually have a custom front panel that is cut much lower than the rest to give unobstructed view of the plants and land area above the water line. So my plans are to take this bottom panel from an old 55g that I have and get it cut down to 8" height. I've already gave it to ol' polarized glasses/LCD screen test to see if it was tempered and it does not seem to be so should be cut-able. Took quite a while to clean it up though. Part of it was painted and spent a couple hours with vinegar & razors to get it as clean as I possibly could so it cuts without issues.
-
Took the 12" x 4*" piece today to the harware. Not only lucked out that its not tempered, but the cost for them cutting it down to 8x48? $2.00.....BOOM! ;)
-
Nice!
-
(https://imagizer.imageshack.com/img923/2064/RKW2wE.jpg)
Been workin on the paludarium tank a bit more lately. Got the top and bottom trim removed so it will be rimless, removed the front glass and replaced it with a piece of glass I had cut down to 8". Scraped out all the old silicone and cleaned it all up and just resealed the tank so just curing up now. Slowly but surely.
-
Really interested in how this is gonna look when finished
-
Really interested in how this is gonna look when finished
Ditto, that makes 2 of us!
-
Took some time today to get back to work on the paludarium. I decided to airbrush a sky with clouds onto the back glass, then back lit it with a full spectrum LED light to give it a more realistic pop. really happy with the way that came out. Built a stand for it now but still have the skin and finish the stand. Starting to plant some of the bonsai trees and plants to form islands. Just mocking up rocks right now to get some ideas, still have a lot more to do till it is finished but starting to get into the fun part now at least.
(https://imagizer.imageshack.com/img922/338/TXBXK6.jpg)
(https://imagizer.imageshack.com/img922/64/S90onn.jpg)
(https://imagizer.imageshack.com/img924/2867/jgdVlI.jpg)
-
(https://imagizer.imageshack.com/img924/5714/RpXDJJ.jpg)
(https://imagizer.imageshack.com/img923/5845/fC0gmY.jpg)
Put about 8 more hours into the paludarium today. It's enjoyable, yet so frustrating. Trying to get rocks just right so the waterfall runs down correctly and get the flow adjusted right. Then making sure certain plants are above water and other with roots in water. Definitely a lot more goes into one of these than I first anticipated. About halfway done now, starting to shape up nicely.
Video- https://www.youtube.com/watch?v=LZuUYFEjkJM
-
Looks awesome Steve, nicely done mate. Great to see this project come together. What are your plans for fish in there? A school of hatchets or Australian Archer fish would look amazing!
-
Not fully decided just yet but thinking guppies and or neons and maybe couple CAE's. Thinking about maybe some shrimp as well but not sure on those yet either still kicking around that idea.
-
Basically finished it today. Other than moving over a group of about 25 bloody mary shrimp I just got for it, and add a shoal of cardinal tetras to it as well.
First here's a vid of it- https://www.youtube.com/watch?v=KiJtNPrpJE8&t=4s
And pics
(https://imagizer.imageshack.com/img924/6687/6FKC5r.jpg)
(https://imagizer.imageshack.com/img924/5177/U5bAJq.jpg)
(https://imagizer.imageshack.com/img924/9431/GxE0Jt.jpg)
(https://imagizer.imageshack.com/img924/9708/CmqKkc.jpg)
(https://imagizer.imageshack.com/img923/5499/ELlTe8.jpg)
(https://imagizer.imageshack.com/img923/2218/NUFhJi.jpg)
(https://imagizer.imageshack.com/img921/8193/MtG6br.jpg)
(https://imagizer.imageshack.com/img922/8311/jm7aRJ.jpg)
(https://imagizer.imageshack.com/img923/2365/dklhrZ.jpg)
-
That looks so amazing mate! I was thinking shrimp would be good, and bloody Mary's are one of my faves. You're creativity is really shining with this project, just WOW!
-
https://www.youtube.com/watch?v=Vt-gF7qabMA
Fog is rolling in on the paludarium tonight. Can even hear the spring peppers singing away (sound on) ;D
-
Soooo cool looking!
-
Great work it looks amazing you did a wonderful job very relaxing to look at.
-
Thanks guys.
Palurdarium is fully cycled now so added some life to it today in the form of four giant danios, 2 doz bloody mary shrimp, few guppies and few snails.
https://www.youtube.com/watch?v=nRpZM_twnXo
-
(https://imagizer.imageshack.com/img924/7049/4UrgID.jpg)
Added four male fancy guppies today. Hard to believe because guppies are such a common fish, but these are actually the first time I have ever owned guppies.
-
Figured I'd do a little 5 week update on my first ever paludarium. Things are going surprisingly well in it so far. I did not experience any sort of die off of any plants during the acclimation period which was a little surprising. Only thing that happened was the ficus bonsai tree on the left dropped all its leaves when I repotted which is normal for it, but now it's pushing out a whole new set of growth the past 2 weeks. Shrimp are doing well and some are pregnant. Snails have been thriving and went from 3 snails to who knows how many now, 50+? Added 7 male guppies and 4 giant danios and they are doing well. All plants are doing great and even have some very nice lush green moss growing naturally on the rocks and wood now which is nice. For my first paludarium build I could not be happier with it so far.
(https://imagizer.imageshack.com/img921/5097/LC2fU1.jpg)
(https://imagizer.imageshack.com/img923/8775/1dRjqg.jpg)
(https://imagizer.imageshack.com/img924/3088/VhtP4D.jpg)
(https://imagizer.imageshack.com/img922/9180/fVzF5e.jpg)
(https://imagizer.imageshack.com/img922/6164/27V36H.jpg)
(https://imagizer.imageshack.com/img924/1026/LrpnKb.jpg)
(https://imagizer.imageshack.com/img924/3766/a6DDGs.jpg)